Section 1 General
Clasification Society 2024 - Version 9.40
Clasifications Register Rules and Regulations - Rules and Regulations for the Classification of Special Service Craft, July 2022 - Part 5 Design and Load Criteria - Chapter 4 Local Design Criteria for Craft Operating in Displacement Mode - Section 1 General

Section 1 General

Parent topic: Chapter 4 Local Design Criteria for Craft Operating in Displacement Mode

1.1 Application

1.1.1 The design criteria given in this Chapter are applicable to all craft when operating in the displacement mode, see Pt 5, Ch 4, 1.1 Application.

1.1.2 Displacement craft are craft with Taylor’s Quotient, Γ, as defined in Pt 5, Ch 2, 2.1 Parameters to be used for the determination of load and design criteria 2.1.17, less than 3,0 and with displacement, Δ, in tonnes, greater than 0,04(L R B)1,5, as defined in Pt 5, Ch 2, 2.2 Symbols 2.2.2.

1.1.3 The design criteria detailed in this Chapter are to be used in conjunction with the load criteria given in Pt 5, Ch 2 Local Design Loads together with the strength formulae given in Pt 6 Hull Construction in Steel, Pt 7 Hull Construction in Aluminium and Pt 8 Hull Construction in Composite to determine the scantlings of steel, aluminium alloy and composite craft as defined in Pt 1 Regulations.

1.1.4 Alternative methods of establishing the design criteria will be specially considered, provided that they are based on established Codes or Standards acceptable to LR. In such cases, full details of the methods used are to be provided when plans are submitted for approval.

Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.