Section 10 Deck support structure
Clasification Society 2024 - Version 9.40
Clasifications Register Rules and Regulations - Rules and Regulations for the Classification of Inland Waterways Ships, July 2022 - Part 4 Ship Structures (Ship Types) - Chapter 5 Tankers of Type G - Section 10 Deck support structure

Section 10 Deck support structure

10.1 General

10.1.1 The deck support structure is to comply with Table 5.10.1 Deck support structure.

Table 5.10.1 Deck support structure

Item Parameter Requirements
Transverse framing
Deck beams in flush deck ships Modulus Zb = 3,1 ksle 2 cm3
Trunk deck beams    
Trunk side stiffeners Modulus Z = Z b cm3
Deck beams abreast trunks    
Deck girders Modulus Z = (0,33 + 0,062Ll) kSle2 cm3
Longitudinal framing
Deck longitudinals in flush deck ships    
Trunk deck longitudinals Modulus Z = (0,073Ll – 0,5) ksle 2 cm3
Trunk side longitudinals    
Deck longitudinals abreast trunks Inertia I = le 2 Z cm4
Deck transverses in flush deck ships Modulus Z t = 3,1kSle 2 cm3
Trunk deck transverses    
Trunk side transverses Modulus Z = Z t cm3
Deck transverses abreast trunks    
Symbols
L, S, s, le, Z, k and I are as defined in Pt 4, Ch 5, 1.10 Symbols and definitions 1.10.1
L1 = L but is to be taken as not less than 50 m, nor more than 100 m

Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.