4 Category 1A
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Circulars - Maritime Safety Committee - MSC/Circular.456 – Guidelines for the Preparation of Intact Stability Information – (Adopted on 13 October 1986) - Annex - Guidelines for the Preparation of Intact Stability Information - 4 Category 1A
4
Category 1A
Information under this category should include the following:
4.1 General information
4.2 Arrangement drawing
4.3 Weights and centres of mass
4.4 Volumes and centres of volume
4.5 Free surface effects
4.6 Lightship particulars and rolling coefficient
4.7 Hydrostatic particulars
4.8 Deadweight particulars and details of draught marks
4.9 Form stability particulars
Parent topic:
Annex - Guidelines for the Preparation of Intact Stability Information
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.