4.8 Deadweight particulars and details of draught marks
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Circulars - Maritime Safety Committee - MSC/Circular.456 – Guidelines for the Preparation of Intact Stability Information – (Adopted on 13 October 1986) - Annex - Guidelines for the Preparation of Intact Stability Information - 4 Category 1A - 4.8 Deadweight particulars and details of draught marks

4.8 Deadweight particulars and details of draught marks

 If required by the Administration, a diagram or tabular presentation giving the relationships between:

  • .1 mean draught;

  • .2 extreme displacement;

  • .3 immersion (displacement per unit interval of draught) ;

  • .4 deadweight.

 If desired, in lieu of the above, the deadweight information may be included in the hydrostatic particulars.

 If required, the positions of the draught marks should be defined in relation to the ship's perpendiculars.

Parent topic: 4 Category 1A
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.