Details resulting from the inclining experiment as follows:
-
.1 lightship weight;
-
.2 longitudinal centre of gravity of lightship;
-
.3 vertical centre of gravity of lightship;
-
.4 transverse centre of gravity of lightship if
necessary;
-
.5 place at and date on which inclining experiment
was conducted;
-
.6 name of organization responsible for the approval
of results obtained during the inclining experiment.
The position of the reference planes should be stated for
items specified in .2, .3 and .4.
If dispensation from carrying out an including experiment
has been given, the name of the authority and the reasons should be
stated. If details of the lightship have been based on a sister ship,
the builder and builders number of the sister ship should be stated
together with items specified in .1 to .6. In such a case details
corresponding to .1, .2, .4, .5 and .6 which apply to the lightship
check should be given.
If differences in values of items specified in .1 to .4
from the sister ship have been used and there are known reasons, these
should be stated together with a summary showing how the adopted values
have arisen.
If permanent ballast is included in the lightship particulars,
a description of such ballast should be included giving the material,
its mass and distribution relative to the common reference planes.
A sketch showing the distribution of such ballast should
be included.
If a rolling period test is required by the Administration,
details of the result should be given.