9.2.1 Hydraulic
fluids are to be suitable for the intended purpose under all operating
service conditions.
9.2.2 Materials
used for all parts of hydraulic seals are to be compatible with the
working fluid at the appropriate working temperature and pressure.
9.2.3 Provision
is to be made for hand operation of the systems in an emergency, unless
an acceptable alternative is available.
9.2.4 Where
hydraulic securing arrangements are applied, the system is to be capable
of being locked in the closed position, so that in the event of hydraulic
system failure, the securing arrangements will remain locked.
9.2.5 Where
pilot operated non-return valves are fitted to hydraulic cylinders
for locking purposes, the valves are to be connected directly to the
actuating cylinder(s) without intermediate pipes or hoses.
9.2.8 Suitable
oil collecting arrangements for leaks shall be fitted below hydraulic
valves and cylinders.