5.1.2 A sufficient
amount of ceiling in the holds and other spaces is to be removed from
the bilges and inner bottom to enable the condition of structure in
the bilges, the inner bottom plating, pillar feet, and the bottom
plating of bulkheads to be examined. If the Surveyor deems it necessary,
the whole of the ceiling is to be removed.
5.1.3 In ships
having a single bottom, the limber boards and ceiling equal to not
less than three strakes, all fore and aft on each side are to be removed,
one such strake being taken from the bilges and one along the centre
keelson. Where the ceiling is fitted in hatches, the whole of the
hatches and at least one strake of ceiling in the bilges are to be
removed. If the Surveyor deems it necessary the whole of the ceiling
and limber boards are to be removed.
5.1.4 The chain
locker is to be cleaned internally. The chain cables are to be ranged
for inspection. The anchors are to be cleaned and placed in an accessible
position for inspection.