7.5 Other Methods designed to provide equivalence
to the D-1 standard can be used
only until the ship type, under the BWM Convention, is required to
comply with the D-2 standard (unless
the system proves it can also provide equivalence to the D-2 standard):
-
.1 these methods should demonstrate through risk
assessment, independently validated physical and biological modelling,
operational testing of this modelling and full-scale operational testing
of systems based on Other Methods, where applicable, that the Other
Method is capable of meeting at all times a level of protection that
is, at least equivalent to, or better than, regulation
D-1 of the BWM Convention;
-
.2 if there is a question about the environmental
impact of an Other Method during its development, such approval should
be split in the same way as it is in Procedure (G9). That is, Other
Methods should be approved by the Administration and Committee based
on independently validated data prior to being tested at sea; and
-
.3 the relevant water quality parameters (e.g.,
suspended solids, salinity, oxygen concentration, particulate organic
matter) should be reasonably the same in the incoming as well as in
the outflowing water.