8.1.2 The following
                                 parts are to be opened out and examined:
                              
                              
                              
                              
                                 - Compressor including impellers or blading, rotors and casing.
 
                                 - Combustion chambers, burners, intercoolers and heat exchangers.
 
                                 - Gas, air and fuel piping and fittings.
 
                                 - Gas generator turbine and power turbine blading, rotors and casing.
 
                                 - Rotors to include couplings, clutches, bearings and tie bolts.
 
                                 - Auxiliary mounted fuel, L.O. and cooling water pumps, their drive
                                    transmissions and fittings.
                                 
 
                                 - Starting system (for starting air pipes, see 
                                    Pt  1, Ch  3,  9.2 Complete Surveys 9.2.3).
                                    
                                 
 
                                 - All safety devices and local controls.
 
                                 - Mountings and support frame.
 
                              
                              
                              
                            
                           
                           
                           
                              
                              
                              8.1.3 The compressor/turbine
                                 units are to be operated and maintained in accordance with the manufacturer's
                                 instructions. Overhauls, including the prescribed replacement of limited
                                 life components, are to be undertaken at the specified intervals.
                                 Full service records are to be available for review by the Surveyor.
                              
                              
                              
                            
                           
                           
                           
                              
                              
                              8.1.4 The manoeuvring
                                 of the propulsion system is to be tested under working conditions.