1.1.1 This Chapter is to be read in conjunction with the General Requirements for Machinery and Engineering Systems in Vol 2, Pt 1, Ch 1 General Requirements for Classification of Engineering Systems and Vol 2, Pt 1, Ch 3 Requirements for Design, Construction, Installation and Sea Trials of Engineering Systems.
1.1.2 The requirements of this Chapter are applicable to steam turbines for main propulsion and other Mobility and/or Ship Type systems.
1.1.3 Where exhaust gas emissions abatement equipment is fitted to steam-raising plant, it is to meet the requirements of Vol 2, Pt 12 Emissions Abatement Plant.
1.2.1 In this Chapter, where the dimensions of any particular component are determined from shaft power, P, in kW, and revolutions per minute, R, the values to be used are those defined in Vol 2, Pt 1, Ch 3, 4.3 Power ratings.
1.3.1 Auxiliary steam turbines coupled to electrical generators are to be capable under service conditions of developing continuously the power to drive the generators at full rated output and of developing for a short period (15 minutes) an overload power of not less than 10 per cent, see Vol 2, Pt 9 Electrotechnical Systems.
1.4.1 Main and auxiliary steam turbines for Mobility and/or Ship Type systems are to operate satisfactorily under the conditions as shown in Table 3.4.2 Inclinations in Pt 1, Ch 3.