Section 1 General
Clasification Society 2024 - Version 9.40
Clasifications Register Rules and Regulations - Rules and Regulations for the Classification of Linkspans, July 2022 - Part 4 Engineering Systems - Chapter 3 Control and Safety of Engineering Systems - Section 1 General

Section 1 General

1.1 General requirements

1.1.1 The requirements of this Chapter apply to the design and construction of safety and control engineering systems.

1.1.2 Compliance with acceptable National Standards which are applicable to the design and construction of safety and control engineering systems on linkspan installations will be considered for classification purposes.

1.2 Design

1.2.1 Systems are to be designed to facilitate safe and effective control under normal operational conditions and are to provide appropriate safeguards in the event of system faults or abnormal operating conditions.

1.3 Installation and testing

1.3.1 Control systems and safeguards are to be installed and tested under LR survey.


Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.