1.1.1 Where
it is intended, as part of normal operational procedures, for the
berthing ship to make contact with a linkspan, a fendering system
is to be fitted capable of absorbing the forces from ships berthing
end-on or near end-on to, or alongside the, linkspan.
1.1.3 The
supporting structure or mountings for fenders are to be capable of
withstanding the fender reaction forces specified in the manufacturer's
performance characteristics for each fender.
1.1.4 Fenders
are generally proprietary items and as such do not require to be made
under survey or tested. Nevertheless, they should be supplied with
appropriate certificates verifying their construction and capacity
to the satisfaction of the attending Surveyor.
1.1.5 All
fender units are to be installed under survey in accordance with the
manufacturer's recommendations.
1.1.6 Where
it is not intended, as part of normal operational procedures, for
berthing ships to contact the linkspan, a statement to this effect
is to be made to LR. In such circumstances a fendering system need
not be fitted. However, it is recommended that this situation is made
clear to all operators using the installation.