Section 3 Information required
Clasification Society 2024 - Version 9.40
Clasifications Register Rules and Regulations - Rules and Regulations for the Classification of Inland Waterways Ships, July 2022 - Part 3 Ship Structures (General) - Chapter 4 Longitudinal Strength - Section 3 Information required

Section 3 Information required

Parent topic: Chapter 4 Longitudinal Strength

3.1 List of requirements

3.1.1 The information as required by Pt 3, Ch 1, 5 Information required is to be submitted.

3.1.2 For ships of which the design bending moments are to be verified by direct calculation, see Pt 3, Ch 4, 5 Design bending moments, the following additional information is to be submitted:

  1. Bonjean data, in tabular form or curves, for the ship at sufficient equally spaced stations forward and aft depending on the shape of the ship.

  2. The actual light weight of the ship and its distribution over the length L of the ship. Where an assumed distribution is submitted, data in support of the assumption may be required.

  3. Details of cargo weights and their centres of gravity for each condition indicated in Pt 3, Ch 4, 2.1 Loading conditions for determination of design bending moments.

  4. Details of loading and discharging sequences, if applicable.

Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.