Part C - Requirements for Cargo Craft
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - International Codes - HSC Code - International Code of Safety for High Speed Craft, 1994 – Resolution MSC.36(63) - Annex - International Code of Safety for High Speed Craft, 1994 - Chapter 10 - Auxiliary Systems - Part C - Requirements for Cargo Craft

Part C - Requirements for Cargo Craft

Parent topic: Chapter 10 - Auxiliary Systems

10.10 Bilge pumping systems

  10.10.1 At least two power pumps connected to the main bilge system should be provided, one of which may be driven by the propulsion machinery. If the Administration is satisfied that the safety of the craft is not impaired, bilge pumping arrangements may be dispensed with in particular compartments. Alternatively, the arrangement may be in accordance with the requirements of 10.3.14.

  10.10.2 On multihull craft each hull should be provided with at least two power pumps, unless a bilge pump in one hull is capable of pumping bilge in the other hull. At least one pump in each hull should be an independent power pump.

Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.