Annex 4 - Standard Reference to the Performance Standards on Protective Coatings
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Circulars - Maritime Safety Committee - MSC.1/Circular.1198 – Application of SOLAS Regulation XII/6.3 on Corrosion Prevention of Dedicated Seawater Ballast Tanks and Application of the Performance Standard for Protective Coatings for Dedicated Seawater Ballast Tanks – (2 June 2006) - Annex 2 - Draft Performance Standard for Protective Coatings for Dedicated Seawater Ballast Tanks in all Types of Ships and Double-side Skin Spaces of Bulk Carriers - Annex 4 - Standard Reference to the Performance Standards on Protective Coatings

Annex 4 - Standard Reference to the Performance Standards on Protective Coatings

* Standards refers to PSPC standard
     
Standard No:   Description
     
ASTM D4145: 1983   Standard Test Method for Coating Flexibility of Prepainted Sheet
SSPC-PA2: 2004   PAINT APPLICATION SPECIFICATION NO.2
ISO 8501–1: 1988/Suppl : 1994   Preparation of steel substrate before application of paints and related products - Visual assessment of surface cleanliness
ISO 8501–3: 2001   Preparation of steel substrate before application of paints and related products - Visual assessment of surface cleanliness
ISO 8502–3: 1993   Preparation of steel substrate before application of paints and related products - Visual assessment of surface cleanliness
ISO 8502–9: 1998   Preparation of steel substrate before application of paints and related products - Visual assessment of surface cleanliness
ISO 8503–1: 1988   Preparation of steel substrate before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates
ISO 8503–3: 1988   Preparation of steel substrate before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates
ISO 2811–4: 1997   Paints and varnishes - Determination of density
ISO 4624: 2002   Paints and varnishes - Pull-off test for adhesion
ISO 4628–2: 2003   Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2
ISO 4628–3: 2003   Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 3: Designation of degree of rusting
ISO 6270–2: 2005   Paints and varnishes - Determination of resistance to humidity - Part 2: Procedure for exposing test specimens in condensation water atmospheres
ISO 19840: 2004   Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Measurement of, and acceptance criteria for, the thickness of dry films on rough surfaces
Parent topic: Annex 2 - Draft Performance Standard for Protective Coatings for Dedicated Seawater Ballast Tanks in all Types of Ships and Double-side Skin Spaces of Bulk Carriers
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.