Circular
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Circulars - Maritime Safety Committee - MSC.1/Circular.1370 – Guidelines for the Design, Construction and Testing of Fixed Hydrocarbon Gas Detection Systems – (22 June 2010) - Circular

Circular

  1 The Maritime Safety Committee, at its eighty-seventh session (12 to 21 May 2010), having considered the proposal by the Sub-Committee on Fire Protection, at its fifty-fourth session, with regard to the amendments to SOLAS regulation II-2/4, adopted by resolution MSC.291(87), and chapter 16 of the FSS Code, adopted by resolution MSC.292(87), approved Guidelines for the design, construction and testing of fixed hydrocarbon gas detection systems, as set out in the annex.

  2 Member Governments are invited to apply the annexed Guidelines when approving fixed hydrocarbon gas detection systems in accordance with paragraph 5.7.3 of SOLAS regulation II-2/4 and chapter 16 of the FSS Code, and bring them to the attention of ship designers, shipowners, equipment manufacturers, test laboratories and other parties concerned.

Parent topic: MSC.1/Circular.1370 – Guidelines for the Design, Construction and Testing of Fixed Hydrocarbon Gas Detection Systems – (22 June 2010)
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.