1 Purpose
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Circulars - Ballast Water Management - BWM.2/Circular.43/Rev.1 – International Convention for the Control and Management of Ships' Ballast Water and Sediments 2004 – (10 May 2018)... - Annex – Guidance for Administrations on the Type Approval Process for Ballast Water Management Systems - 1 Purpose

1 Purpose

 1.1 This document provides guidance for Administrations on the procedure for evaluating an application for type approval of a ballast water management system (BWMS), in accordance with the Code for Approval of Ballast Water Management Systems (BWMS Code). The Guidance can act as an aide-memoire for Administrations and is not intended, in any way, to interfere with the authority of an Administration.

 1.2 This document provides guidance on interpretation of the BWMS Code and does not replace or supersede the requirements of the Code.

 1.3 This document is intended to provide guidance to Administrations on the details of the type approval to be reported to the Committee.


Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.