4 Remedial and Corrective Measures
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Circulars - Marine Environment Protection Committee - MEPC.1/Circular.677 – Guide to Diagnosing Contaminants in Oily Bilge Water to Maintain, Operate and Troubleshoot Bilge Water Treatment Systems – (22 July 2009) - Annex – A Guide to Diagnosing Contaminants in Oily Bilge Water to Maintain, Operate and Troubleshoot Bilge Water Treatment Systems - Annex 6 – Detecting Both Oil and Oil Emulsion: Multiple Contaminants and/or Mechanical - 4 Remedial and Corrective Measures

4 Remedial and Corrective Measures

 ▸ Refer to annexes 3, 4 and 5 to isolate each [potential] problem.

▸ Engage joint support from all vendors of relevant equipment to determine cause of failure and long-term prevention measures.

▸ Manage bilge to minimize contaminants.

▸ If indicated, it may be necessary to change or install additional equipment to handle bilge conditions.

Parent topic: Annex 6 – Detecting Both Oil and Oil Emulsion: Multiple Contaminants and/or Mechanical
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.