6.4.8 Analyser in-service performance
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - International Codes - NOx Technical Code (2008) - Technical Code on Control of Emission of Nitrogen Oxides from Marine Diesel Engines - Chapter 6 - Procedures for demonstrating compliance with NOx emission limits on board - 6.4 Direct measurement and monitoring method - 6.4.8 Analyser in-service performance

6.4.8 Analyser in-service performance

  6.4.8.1 Analysing equipment shall be operated in accordance with manufacturer’s recommendations.

  6.4.8.2 Prior to measurement, zero and span values shall be checked and the analysers shall be adjusted as necessary.

  6.4.8.3 After measurement, analyser zero and span values shall be verified as being within that permitted by 5.9.9.

Parent topic: 6.4 Direct measurement and monitoring method
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.