28 Information regarding the system configuration
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Resolutions - Maritime Safety Committee - Resolution MSC.252(83) - Adoption of the Revised Performance Standards for Integrated Navigation Systems (INS) - (Adopted on 8 October 2007) - Annex - Performance Standards for Integrated Navigation Systems (INS) - Module D - Documentation requirements - 28 Information regarding the system configuration

28 Information regarding the system configuration

  28.1 Manufacturer or system integrator of INS should declare the following information relating to the system configuration, if applicable:

  • basic system configuration
  • interconnecting block diagram (Hardware)
  • sources identification
  • override
  • priority of control (task stations)
  • data flow schematic diagram and its interpretation
  • default conditions
  • back-up arrangement
  • redundancy arrangement
  • explanation of scope to fulfil requirements of SOLAS regulation V/19 with particular INS (for one equipment concept)

 other useful materials for inspector (such evidence of fulfilled requirements as other means).

Parent topic: Module D - Documentation requirements
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.