Regulation 6 - Structural and other requirements for bulk carriers
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Circulars - Maritime Safety Committee - MSC.1/Circular.1198 – Application of SOLAS Regulation XII/6.3 on Corrosion Prevention of Dedicated Seawater Ballast Tanks and Application of the Performance Standard for Protective Coatings for Dedicated Seawater Ballast Tanks – (2 June 2006) - Annex 1 - Draft Amendments to SOLAS Regulations II-1/3.2 and XII/6.3 and Appendix - Chapter XII - Additional Safety Measures for Bulk Carriers - Regulation 6 - Structural and other requirements for bulk carriers

Regulation 6 - Structural and other requirements for bulk carriers

  2 The existing paragraph 3 is deleted and existing paragraphs 4 and 5 are renumbered as paragraphs 3 and 4.

Parent topic: Chapter XII - Additional Safety Measures for Bulk Carriers
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.