3.2 15 ppm Bilge Separator
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Resolutions - Marine Environment Protection Committee - Resolution MEPC.107(49) - Revised Guidelines and Specifications for Pollution Prevention Equipment for Machinery Space Bilges of Ships - (adopted on 18 July 2003) - Annex - Revised Guidelines and Specifications for Pollution Prevention Equipment for Machinery Space Bilges of Ships - 3 Definitions - 3.2 15 ppm Bilge Separator

3.2 15 ppm Bilge Separator

 “15 ppm Bilge Separator” may include any combinations of a separator, filter, coalescer or other means, and also a single unit designed to produce an effluent with oil content not exceeding 15 ppm.

Parent topic: 3 Definitions
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.