1 Non-cohesive cargoes

1.1 The following cargoes are non-cohesive when dry:

ALUMINIUM FLUORIDE

AMMONIUM NITRATE

AMMONIUM NITRATE BASED FERTILIZERS (TYPE A, TYPE B and NON-HAZARDOUS)

AMMONIUM SULPHATE

BORAX, ANHYDROUS

BRUCITE

CALCIUM NITRATE FERTILIZER

CHLORITE

DIAMMONIUM PHOSPHATE

FERRONICKEL SLAG (granulated)

FLUE DUST, CONTAINING LEAD AND ZINC

GRAIN SCREENING PELLETS

GRANULAR FERROUS SULPHATE

MAGNESIUM SULPHATE FERTILIZERS

MONOAMMONIUM PHOSPHATE

MONOAMMONIUM PHOSPHATE (M.A.P.), MINERAL ENRICHED COATING

MONOCALCIUMPHOSPHATE (MCP)

OLIVINE GRANULAR AND GRAVEL AGGREGATE PRODUCTS

OLIVINE SAND

POTASH

POTASSIUM CHLORIDE

POTASSIUM NITRATE

POTASSIUM SULPHATE

SAND, MINERAL CONCENTRATE, RADIOACTIVE MATERIAL, LOW SPECIFIC ACTIVITY (LSA-I) UN 2912

SEED CAKES AND OTHER RESIDUES OF PROCESSED OILY VEGETABLES (group B)^footnote

SEED CAKES AND OTHER RESIDUES OF PROCESSED OILY VEGETABLES (group C)^footnote

SODIUM NITRATE AND POTASSIUM NITRATE MIXTURE

SPODUMENE (UPGRADED)

SUGARCANE BIOMASS PELLETS

SUPERPHOSPHATE

SYNTHETIC SILICON DIOXIDE

TAPIOCA

UREA

WOOD PELLETS CONTAINING ADDITIVES AND/OR BINDERS

WOOD PELLETS NOT CONTAINING ANY ADDITIVES AND/OR BINDERS

WOOD TORREFIED

1.2 Prior to completion of loading, the angle of repose of the materials to be loaded should be determined (see section 6) so as to determine which provisions of this Code relating to trimming apply (see section 5).

1.3 All cargoes, other than those listed in this appendix, are cohesive and the use of the angle of repose is, therefore, not appropriate. Cargoes not listed should be treated as cohesive until otherwise shown.