2 Background
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Resolutions - Marine Environment Protection Committee - Resolution MEPC.60(33) - Guidelines and Specifications for Pollution Prevention Equipment for Machinery Space Bilges of Ships - (adopted on 30 October 1992)Clasifications Register Note: See also Resolution MEPC.107(49) - Annex - Guidelines and Specifications for Pollution Prevention Equipment for Machinery Space Bilges of Ships - 2 Background

2 Background

  2.1 The requirements of Annex I of MARPOL 73/78 relating to pollution prevention equipment for ships are set out in Regulation 16, which stipulates that ships of 400 tons gross tonnage and above should be installed with approved equipment.

  2.2 Regulation 16(5) stipulates that the effluent from oil filtering equipment should not exceed 15 ppm. The bilge alarm shall activate to indicate when this level cannot be maintained.

Parent topic: Annex - Guidelines and Specifications for Pollution Prevention Equipment for Machinery Space Bilges of Ships
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.