Clasification Society Guidance Information - Guidance Notes for Technology Qualification, April 2017 - Chapter 1 Technology Qualification - Section 2 Abbreviations and definitions
Section 2 Abbreviations and definitions
2.1 Abbreviations
2.1.1 The following abbreviations are applicable to these Guidance Notes unless otherwise
stated.
| AiP | approval in principle |
| CHAZOP | control hazard and operability study |
| CTE | critical technology element |
| DAD | design appraisal document |
| FMEA | failure modes and effects analysis |
| FMECA | failure mode, effects and criticality analysis |
| HAZID | hazard identification study |
| HAZOP | hazard & operability study |
| IML | integration maturity level |
| LR | Clasification Society |
| MDR | master document register |
| RCA | root cause analysis |
| R&D | research and development |
| SME | subject matter expert |
| SWIFT | structured what-if technique |
| TQ | Technology Qualification |
| TQP | Technology Qualification Plan |
| TML | technology maturity level |
| Copyright 2020 Clasification Society, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasification Society, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasification Society'. Clasification Society Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasification Society entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. |  |