Where helicopters land or conduct winching operations on
an occasional or emergency basis on ships with helicopter landing
areas, equipment fitted in accordance with SOLAS chapter II-2 may
be used. This equipment should be made readily available in close
proximity to the landing or winching areas during helicopter operations,
and should include the following:
-
.1 at least two dry powder extinguishers having
a total capacity of not less than 45 Kg;
-
.2 carbon dioxide extinguishers of a total capacity
of not less than 18 Kg or equivalent;
-
.3 a suitable foam application system consisting
of monitors or foam making branch pipes capable of delivering foam
to all parts of the helicopter landing area;
-
.4 at least two nozzles of an approved dual-purpose
type (jet/spray) and hoses of sufficient length to reach any part
of the helicopter landing area;
-
.5 in lieu of the provisions of paragraphs 4.3 and
4.4, on ships constructed on or after 1 January 2020, foam firefighting appliances
complying with the provisions of the International Code for Fire Safety Systems
(FSS
Code).
-
.6 two sets of fireman's outfits; and
-
.7 in addition, at least the following equipment:
-
.1 adjustable wrench;
-
.2 blanket (fire resistant);
-
.3 cutters, bolt 60 cm;
-
.4 hook, grab or salving;
-
.5 hacksaw, heavy duty complete with 6 spare blades;
-
.6 ladder;
-
.7 life line 5 mm diameter x 15 m in length;
-
.8 pliers, side cutting;
-
.9 set of assorted screwdrivers; and
-
.10 harness knife complete with sheath.