2.2 Manual drop mechanism
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Circulars - Maritime Safety Committee - MSC/Circular.811 – Identification of Float-Free Arrangements For Liferafts – (Adopted on 8 July 1997) - Annex – Three Systems used in Float Free Arrangements - 2 Non-weak link system - 2.2 Manual drop mechanism

2.2 Manual drop mechanism

 When the release handle (located on the cradle) is pulled, one end of the lashing wire is disconnected while the other end of the wire is connected to the hydrostatic release unit, the container drops from the cradle rolling and pulls the operating line so the liferaft reaches the surface of the water while inflating. At this time the liferaft is tied to the ship by the painter.

Parent topic: 2 Non-weak link system
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.