5.2 Damage stability
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Circulars - Maritime Safety Committee - MSC.1/Circular.1329 – Guidelines for Uniform Operating Limitations of High-Speed Craft – (11 June 2009) - Annex – Guidelines for Uniform Operating Limitations of High-Speed Craft - 5 Sea State Limitations – Significant Wave Height - 5.2 Damage stability

5.2 Damage stability

 In paragraph 2.6.11 of the Code, the required minimum residual freeboard to downflooding is a function of the significant wave height corresponding to the worst intended conditions.

Parent topic: 5 Sea State Limitations – Significant Wave Height
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.