3.10 Equivalent Standards
Clasification Society 2024 - Version 9.40
Statutory Documents - MCA Publications - MGN 280 - Small Vessels in Commercial Use for Sport or Pleasure, Workboats and Pilot Boats - Alternative Construction Standards - 3 Application and Interpretation - 3.10 Equivalent Standards

3.10 Equivalent Standards

  3.10.1 When the Code requires that a particular piece of equipment or machinery should be provided or carried in a vessel or that any particular provision should be made, to a specified standard, the MCA may permit any other piece of equipment or machinery to be provided or carried, or any other provision to be made, provided that the MCA is satisfied by trials or otherwise that the alternative is at least as effective as that required by the Code.

  3.10.2 For the purpose of the Code, the results of verification and tests carried out by bodies and laboratories of other Member States of the European Economic Area Agreement, and Turkey, offering suitable and satisfactory guarantees of technical and professional competence and independence should be accepted.


Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.