2.7 Fatigue analysis
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - International Codes - 1989 MODU Code – Code for the Construction and Equipment of Mobile Offshore Drilling Units, 1989 – Resolution A.649(16) - Chapter 2 – Construction, Strength and Materials - 2.7 Fatigue analysis

2.7 Fatigue analysis

  2.7.1 The possibility of fatigue damage due to cyclic loading should be considered in the design of self-elevating and column-stabilized units.

  2.7.2 The fatigue analysis should be based on the intended mode and area of operations to be considered in the unit's design.

  2.7.3 The fatigue analysis should take into account the intended design life and the accessibility of individual structural members for inspection.

Parent topic: Chapter 2 – Construction, Strength and Materials
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.