6.1.1 To ensure compliance with this Standard,
                           the following shall be carried out by qualified coating inspectors
                           certified to NACE Coating Inspector Level 2, FROSIO Inspector Level
                           III or equivalent as verified by the Administration.
                        
                        
                        
                      
                     
                     
                     
                        
                        
                         
                           6.1.2 Coating inspectors shall inspect surface
                           preparation and coating application during the coating process by
                           carrying out, as a minimum, those inspection items identified in subsection
                           6.2 to ensure compliance with this Standard. Emphasis shall be placed
                           on initiation of each stage of surface preparation and coatings application
                           as improper work is extremely difficult to correct later in the coating
                           progress. Representative structural members shall be non-destructively
                           examined for coating thickness. The inspector shall verify that appropriate
                           collective measures have been carried out.
                        
                        
                        
                      
                     
                     
                     
                        
                        
                         
                           6.1.3 Results from the inspection shall be recorded
                           by the inspector and shall be included in the CTF (see annex 2).