2 Test Specimen
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Resolutions - Maritime Safety Committee - Resolution MSC.41(64) - Interim Standard for Measuring Smoke and Toxic Products for Combustion - (adopted on 5 December 1994) - Annex - Interim Standard for Measuring Smoke and Toxic Products of Combustion - 2 Test Specimen

2 Test Specimen

 Preparation of test specimen should be in accordance with the practice outlined in Assembly resolution A.653(16) for surface finish materials for bulkheads, decks and ceilings, Assembly resolution A.687(17) for primary deck coverings, and Assembly resolution A.753(18) for plastic pipes. In the case of cables, only specimens of those with maximum insulation thickness need be tested.

Parent topic: Annex - Interim Standard for Measuring Smoke and Toxic Products of Combustion
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.