Clasification Society Rulefinder 2016 - Version 9.25

Statutory Documents - IMO Publications and Documents - Resolutions - Marine Environment Protection Committee - Resolution MEPC.214(63) – 2012 Guidelines on Survey and Certification of the Energy Efficiency Design Index (EEDI) – (Adopted on 2 March 2012)Amended by Resolution MEPC.234(65) - Annex – 2012 Guidelines on Survey and Certification of the Energy Efficiency Design Index (EEDI) - Appendix 1 – Sample of EEDI Technical File - 6 Calculated Value of attained EEDI

6 Calculated Value of attained EEDI

6.1 Basic data

Type of Ship	Capacity DWT	Speed V_ref (knots)
Bulk Carrier	150,000	14.25

6.2 Main engine

MCR_ME (kW)	Shaft Gen.	P_ME (kW)	Type of Fuel	C_FME	SFC_ME (g/kWh)
15,000	N/A	11,250	Diesel Oil	3.206	165.0

6.3 Auxiliary engines

P_AE (kW)	Type of Fuel	C_FAE	SFC_AE (g/kWh)
625	Diesel Oil	3.206	220.0

6.4 Ice class

N/A

6.5 Innovative electrical energy efficient technology

N/A

6.6 Innovative mechanical energy efficient technology

N/A

6.7 Cubic capacity correction factor

N/A

6.8 Calculated value of attained EEDI

EEDI	=
	=
	=	2.99 (g – CO₂/ton • mile)

attained EEDI: 2.99 g-CO₂/ton mile

Copyright 2016 Clasification Society, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasification Society, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasification Society'. Clasification Society Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasification Society entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.