4.3.6 Markings on rigid liferafts
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - International Codes - LSA Code - International Life-Saving Appliance Code – Resolution MSC.48(66) - Chapter IV - Survival Craft - 4.3 Rigid liferafts - 4.3.6 Markings on rigid liferafts

4.3.6 Markings on rigid liferafts

 The liferaft shall be marked with:

  • .1 name and port of registry of the ship to which it belongs;

  • .2 makers name or trade mark;

  • .3 serial number;

  • .4 name of approving authority;

  • .5 number of persons it is permitted to accommodate over each entrance in characters not less than 100 mm in height of a colour contrasting with that of the liferaft;

  • .6 SOLAS;

  • .7 type of emergency pack enclosed;

  • .8 length of painter;

  • .9 maximum permitted height of stowage above waterline (drop-test height); and

  • .10 launching instructions.

Parent topic: 4.3 Rigid liferafts
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.