1.1.1 This Chapter is applicable to all linkspans that are either totally or partially
supported by buoyant means.
1.1.2 Where it is intended to transport a linkspan pontoon by means of towing or where the
pontoon will be lifted into place, the strength of shipboard fittings and supporting
hull structures are to be assessed in accordance with the requirements of this
Chapter.
1.1.3 The arrangements, equipment and fittings of sufficient safe working load (SWL) are to
be provided to enable the safe conduct of all towing and lifting operations.
1.1.4 Shipboard fittings means bollards and bitts, fairleads, stand rollers, chocks used
for the towing of the ship, and padeyes, lifting lugs etc. used for the lifting of
the ship. Any weld or bolt or equivalent device connecting the shipboard fitting to
the supporting structure is part of the shipboard fitting. Other components such as
capstans, winches, etc. are not covered by this Chapter.
1.1.5 Supporting hull structures means that part of the ship structure on/in which the
shipboard fitting is placed and which is directly submitted to the forces exerted on
the shipboard fitting. The supporting hull structure of capstans, winches, etc. used
for towing operations mentioned above is also to comply with the requirements
specified in this Chapter.