Section 2 Functional objectives
Clasification Society 2024 - Version 9.40
Clasifications Register Rules and Regulations - Submarine Assurance Framework, July 2022 - Volume 1 Submarine Assurance - Part 4 Whole Boat Requirements - Chapter 7 Hazard and Risk Assessment - Section 2 Functional objectives

Section 2 Functional objectives

2.1 Functional objectives

2.1.1 A suitable process is to be adopted that will identify, analyse, evaluate and manage hazards associated with the operation of the submarine, systems and equipment in all reasonably foreseeable, normal, abnormal and emergency operating conditions.

2.1.2 The tolerable level of risk is to be established and agreed with the Naval Administration.

2.1.3 Assessments are to be undertaken at several levels: whole boat, for key functions, systems and equipment during the full lifecycle of the submarine design.

2.1.4 The impact of modifications, changes or degradation of the submarine on the safety and assumptions used in the risk assessment are to be evaluated.


Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.