Interpretation Maximum allowable area of suction well (Paragraph 2.6.2)
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Circulars - Maritime Safety Committee - MSC/Circular.406/Rev.1 – Guidelines on Interpretation of the IBC Code and the IGC Code and Guidelines for the Uniform Application of the Survival Requirements of the IBC and IGC Codes – (Adopted on 29 June 1990) - Annex - Guidelines on Interpretation of the IBC Code and the IGC Code and Guidelines for the Uniform Application of the Survival Requirements of the IBC and IGC Codes - Interpretation of Provisions in the IBC Code - InterpretationMaximum allowable area of suction well (Paragraph 2.6.2)

Interpretation Maximum allowable area of suction well (Paragraph 2.6.2)

 The area of suction well should not be greater than that required to accommodate equipment such as cargo pumps, suction pipes, valves, associated heating coils, etc., and to ensure efficient flow and the necessary access for cleaning and maintenance.

Parent topic: Interpretation of Provisions in the IBC Code
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.