LIMESTONE
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - International Codes - IMSBC Code – International Maritime Solid Bulk Cargoes Code – Resolution MSC.268(85) - Appendix 1 – Individual Schedules of Solid Bulk Cargoes - LIMESTONE

LIMESTONE

Description

Limestone varies in colour from cream through white to medium dark grey (when freshly broken).

Moisture: up to 4%.

Characteristics

Physical properties
Size Angle of repose Bulk density (kg/m3) Stowage factor (m3/t)
Fines up to 90 mm Not applicable 1,190 to 1,493 0.67 to 0.84
Hazard classification
Class Subsidiary hazard(s) MHB Group
Not applicable Not applicable Not applicable C

Hazard

No special hazards.

This cargo is non-combustible or has a low fire risk.

Stowage and segregation

No special requirements.

Hold cleanliness

No special requirements.

Weather precautions

No special requirements.

Loading

Trim in accordance with the relevant provisions required under sections 4 and 5 of this Code.

Precautions

Bilge wells shall be clean, dry and covered as appropriate, to prevent ingress of the cargo.

Ventilation

No special requirements.

Carriage

No special requirements.

Discharge

No special requirements.

Clean-up

No special requirements.


Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.