Annex - Guidelines on the Sampling Method of Thickness Measurements for Longitudinal Strength Evaluation and Repair Methods in Accordance with Annex 12 To Annex B to Resolution A.744(18), as Amended
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Circulars - Maritime Safety Committee - MSC/Circular.1055 – Guidelines on the Sampling Method of Thickness Measurements for Longitudinal Strength Evaluation and Repair Methods in Accordance with Annex 12 to Annex B to Resolution A.744(18), as Amended – (Adopted on 23 December 2002) - Annex - Guidelines on the Sampling Method of Thickness Measurements for Longitudinal Strength Evaluation and Repair Methods in Accordance with Annex 12 To Annex B to Resolution A.744(18), as Amended

Annex - Guidelines on the Sampling Method of Thickness Measurements for Longitudinal Strength Evaluation and Repair Methods in Accordance with Annex 12 To Annex B to Resolution A.744(18), as Amended

 The condition of the hull girder for longitudinal strength should be determined in accordance with the methods specified hereunder.

Parent topic: MSC/Circular.1055 – Guidelines on the Sampling Method of Thickness Measurements for Longitudinal Strength Evaluation and Repair Methods in Accordance with Annex 12 to Annex B to Resolution A.744(18), as Amended – (Adopted on 23 December 2002)
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.