6 Reporting of the Type Approval
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Circulars - Ballast Water Management - BWM.2/Circular.43/Rev.1 – International Convention for the Control and Management of Ships' Ballast Water and Sediments 2004 – (10 May 2018)... - Annex – Guidance for Administrations on the Type Approval Process for Ballast Water Management Systems - 6 Reporting of the Type Approval

6 Reporting of the Type Approval

  6.1 The Administration should forward a report of the type approval process to the Organization, including the relevant documentation as specified in part 7 of the annex to the BWMS Code.

  6.2 In particular, where under Procedure (G9) the Final Approval has been granted with recommendations by the GESAMP-BWWG, evidence that these recommendations have been satisfactorily addressed at type approval should be provided to the Organization. The report should specify the findings of the Administration together with any non-confidential information according to Procedure (G9).

Parent topic: Annex – Guidance for Administrations on the Type Approval Process for Ballast Water Management Systems
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.