7.1 Design for Servicing
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Resolutions - Maritime Safety Committee - Resolution MSC.192(79) - Adoption of the Revised Performance Standards for Radar Equipment - (Adopted on 6 December 2004) - Annex - Revised Recommendation on Performance Standards for Radar Equipment - 7 Design and Installation - 7.1 Design for Servicing

7.1 Design for Servicing

  7.1.1 As far as is practical, the radar system should be of a design to facilitate simple fault diagnosis and maximum availability.

  7.1.2 The radar system should include a means to record the total operational hours for any components with a limited life.

  7.1.3 The documentation should describe any routine servicing requirements and should include details of any restricted life components.

Parent topic: 7 Design and Installation
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.