Statutory Documents - IMO Publications and Documents - Resolutions - Marine Environment Protection Committee - Resolution MEPC.214(63) – 2012 Guidelines on Survey and Certification of the Energy Efficiency Design Index (EEDI) – (Adopted on 2 March 2012)Amended by Resolution MEPC.234(65) - Annex – 2012 Guidelines on Survey and Certification of the Energy Efficiency Design Index (EEDI) - Appendix 1 – Sample of EEDI Technical File - 3 Overview of Propulsion System and Electric Power Supply System
3 Overview of Propulsion System and Electric Power Supply System
3.1 Propulsion system
3.1.1 Main engine
Refer to subparagraph 1.3.
3.1.2 Propeller
| Type | Fixed pitch propeller |
| Diameter | 7.0 m |
| Number of blades | 4 |
| Number of set | 1 |
3.2 Electric power supply system
3.2.1 Auxiliary engines
Refer to subparagraph 1.4.
3.2.2 Main generators
| Manufacturer | JAPAN Electric |
| Rated output | 560 kW (700 kVA) x 900 rpm |
| Voltage | AC 450 V |
| Number of set | 3 |
Figure 3.1 Schematic figure of propulsion and electric power supply system
| Copyright 2016 Clasification Society, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasification Society, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasification Society'. Clasification Society Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasification Society entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. |  |