1 Electrical equipment: materials and design
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - International Codes - NOx Technical Code (2008) - Technical Code on Control of Emission of Nitrogen Oxides from Marine Diesel Engines - Appendix 8 – Implementation of the direct measurement and monitoring method(Refer to 6.4 of the NOx Technical Code 2008) - 1 Electrical equipment: materials and design

1 Electrical equipment: materials and design

  1.1 Electrical equipment shall be constructed of durable, flame-retardant, moisture-resistant materials that are not subject to deterioration in the installed environment and at the temperatures to which the equipment is likely to be exposed.

  1.2 Electrical equipment shall be designed such that current carrying parts with potential to earth are protected against accidental contact.

Parent topic: Appendix 8 – Implementation of the direct measurement and monitoring method (Refer to 6.4 of the NOx Technical Code 2008)
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.