Statutory Documents - IMO Publications and Documents - Resolutions - Assembly - IMO Resolution A.658(16) – Use and Fitting of Retro-Reflective Materials on Life-Saving Appliances – (Adopted on 19 October 1989) - Annex 1 - Recommendation on the Use and Fitting of Retro-Reflective Materials on Life-Saving Appliances - 7 General Remarks
7 General Remarks
.1 Retro-reflective materials should be such as will meet the minimum technical specification given in Annex 2.
.2 The illustrations reproduced in this Annex are intended to provide Administrations with examples from which guidance may be taken when fitting retro-reflective materials in accordance with these guidelines.
Figure 6 Illustration showing retro-reflective materials on life-saving appliances
Figure 7 Illustration showing retro-reflective materials on life-saving appliances
| Copyright 2020 Clasification Society, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasification Society, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasification Society'. Clasification Society Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasification Society entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract. |  |