3.6.4 Inert gas valve (see regulation 62.10.9)
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Specifications and Manuals - Inert Gas Systems - 3 Function and Design Considerations - 3.6 Function of nonreturn devices - 3.6.4 Inert gas valve (see regulation 62.10.9)

3.6.4 Inert gas valve (see regulation 62.10.9)

 This valve should be opened when the inert gas plant is shut down to prevent leakage past the nonreturn devices from building up any pressure in the inert gas line between the gas pressure regulating valve and these nonreturn devices.

Deck water seal-wet type.

Deck water seal-semi-dry type.

Deck water seal-dry type.

Parent topic: 3.6 Function of nonreturn devices
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.