3.6 Test
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Circulars - Maritime Safety Committee - MSC.1/Circular.1331 – Guidelines for Construction, Installation, Maintenance and Inspection/Survey of Means of Embarkation and Disembarkation – (11 June 2009) - Annex – Guidelines for Construction, Installation, Maintenance and Inspection/Survey of Means of Embarkation and Disembarkation - 3 Installation - 3.6 Test

3.6 Test

  3.6.1 After installation, the winch and the accommodation ladder should be operationally tested to confirm proper operation and condition of the winch and the ladder after the test.

  3.6.2 The winch should be tested as a part of the complete accommodation ladder unit through a minimum of two times hoisting and lowering of the accommodation ladder in accordance with the onboard test requirement specified in applicable international standards such as ISO 7364:1983.

  3.6.3 Every new accommodation ladder should be subjected to a static load test of the specified maximum working load upon installation.

Parent topic: 3 Installation
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.