6.3 Instructions and Documentation
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Resolutions - Maritime Safety Committee - Resolution MSC.192(79) - Adoption of the Revised Performance Standards for Radar Equipment - (Adopted on 6 December 2004) - Annex - Revised Recommendation on Performance Standards for Radar Equipment - 6 Ergonomic Criteria - 6.3 Instructions and Documentation

6.3 Instructions and Documentation

6.3.1 Documentation Language

 The operating instructions and manufacturer's documentation should be written in a clear and comprehensible manner and should be available at least in the English language.

6.3.2 Operating Instructions

 The operating instructions should contain a qualified explanation and/or description of information required by the user to operate the radar system correctly, including:

  • appropriate settings for different weather conditions;
  • monitoring the radar system's performance;
  • operating in a failure or fall-back situation;
  • limitations of the display and tracking process and accuracy, including any delays;
  • using heading and SOG/COG information for collision avoidance;
  • limitations and conditions of target association;
  • criteria of selection for automatic activation and cancellation of targets;
  • methods applied to display AIS targets and any limitations;
  • principles underlying the trial manoeuvre technology, including simulation of own ship's manoeuvring characteristics, if provided;
  • alarms and indications;
  • installation requirements as listed under section 7.5;
  • radar range and bearing accuracies; and
  • any special operation (e.g. tuning) for the detection of SARTs; and
  • the role of the CCRP for radar measurements and its specific value.

6.3.3 Manufacturer's Documentation

  6.3.3.1 The manufacturer's documentation should contain a description of the radar system and factors that may affect detection performance, including any latency in signal processing.

  6.3.3.2 Documentation should describe the basis of AIS filter criteria and AIS/radar target association criteria.

  6.3.3.3 The equipment documentation should include full details of installation information, including additional recommendations on unit location and factors that may degrade performance or reliability.


Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.