1.4 Summary of Requirements
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Resolutions - Marine Environment Protection Committee - Resolution MEPC.60(33) - Guidelines and Specifications for Pollution Prevention Equipment for Machinery Space Bilges of Ships - (adopted on 30 October 1992)Clasifications Register Note: See also Resolution MEPC.107(49) - Annex - Guidelines and Specifications for Pollution Prevention Equipment for Machinery Space Bilges of Ships - 1 Introduction - 1.4 Summary of Requirements

1.4 Summary of Requirements

  1.4.1 The approval requirements for pollution prevention equipment specified in these Guidelines and Specifications are summarized below:

  • .1 the oil filtering equipment should be tested for type approval in accordance with the procedures described in part 1 of the annex, subject to environmental tests specified part 3 of the annex; and

  • .2 the oil content meter for the bilge alarms should be tested for type approval in accordance with part 2 of the annex, subject to the environmental tests specified in part 3 of the annex.

Parent topic: 1 Introduction
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.