3.1 This section contains operational procedures
in respect of cargo unloading and tank stripping which must be followed
in order to ensure compliance with the requirements of Annex II.
3.2
Cargo unloading
This section shall contain procedures to be followed including
the pump and cargo unloading and suction line to be used for each
tank. Alternative methods may be given.
The
method of operation of the pump or pumps and the sequence of operation
of all valves shall be given.
The basic requirement
is to unload the cargo to the maximum extent.
3.3
Cargo tank stripping
This section shall contain procedures to be followed during
the stripping of each cargo tank.
The procedures
shall include the following:
-
.1
operation of stripping system;
-
.2
list and trim requirements;
-
.3
line draining and stripping
or blowing arrangements if applicable; and
-
.4
duration of the stripping
time of the water test.
3.4
Cargo temperature
This section shall contain information on the heating
requirements of cargoes which have been identified as being required
to be at a certain minimum temperature during unloading.
Information shall be given on control of the heating system
and the method of temperature measurement.
3.5
Procedures to be followed when a cargo
tank cannot be unloaded in accordance with the required procedures
This section shall contain information on the procedures
to be followed in the event that the requirements contained in sections
3.3 and/or 3.4 cannot be met due to circumstances such as the following:
3.6
Cargo Record Book
The Cargo Record Book shall be completed in the appropriate
places on completion of any cargo operation.