9 Composition and application of securing devices
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - International Codes - CSS Code - Code of Safe Practice for Cargo Stowage and Securing1 – Resolution A.714(17) - Annex 5 - Safe Stowage and Securing of Heavy Cargo Items such as Locomotives, Transformers, etc. - 9 Composition and application of securing devices

9 Composition and application of securing devices

  9.1 Securing devices should be assembled so that each component is of equal strength.

  9.2 Connecting elements and tightening devices should be used in the correct way. Consideration should be given to any reduction of the strength of the lashings during the voyage through corrosion, fatigue or mechanical deterioration and should be compensated by using stronger securing material.

  9.3 Particular attention should be paid to the correct use of wire, grips and clips. The saddle portion of the clip should be applied to the live load segment and the U-bolt to the dead or shortened end segment.

  9.4 Securing devices should be arranged in such a way that each device takes its share of load according to its strength.

  9.5 Mixed securing arrangements of devices with different strength and elongation characteristics should be avoided.

Parent topic: Annex 5 - Safe Stowage and Securing of Heavy Cargo Items such as Locomotives, Transformers, etc.
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.